1. The PCB size of HT-E8D which can mount is 100*100mm-1200*300mm
2. DOB bulbs light SMT assembly machine HT-E8D can produce 2 different applications at the same time in double module
3. HT-E8D has 24 heads and 48 feeders station with double mounting heads,one mounting head has 12 heads, each head is controlled independently by one servo motor
Product desription
YT101S type PCB board drive SMT pick and place machine, with a total weight of 1700kg, is a very stable arch-type placement machine, the head moves back and forth in a straight line.
The placement head is newly upgraded, adopts a fixed flight recognition camera, and is equipped with a vacuum sensing device, so that each suction nozzle exists independently, and is driven by an independent servo motor. Under optimal conditions, the production capacity can reach 40000CPH.
The range of identification components is 0201-40*40mm, the feeding system is a double-head intelligent feeder, the position of the components is optically corrected, and the feeding is more accurate and stable.
Parameter
|
PCB size(L* W) |
Max size: 500mm*350mm Min size: 50mm*50mm |
|
PCB thickness |
0.5-4.5mm |
|
Repeat precision |
±0.02mm |
|
Mounting height |
≤20mm |
|
Mounting speed |
40000CPH (Optimum speed) |
|
Components range |
Min 0201 ~40*40mm packages and IC etc. |
|
Transmission mode |
Online drive |
|
X,Y,Z Axis drive way |
High-end magnetic linear motor +Servo motor |
Introduction of anti-static facilities in SMT production line
The electrostatic protection during the PCBA processing operation of the SMT production line is a systematic project. The SMT processing plant should first establish and check the basic anti-static projects, such as ground wires, floor mats and platform integration, and environmental anti-static king projects. Because once the equipment enters the workshop, if it is found that the environment does not meet the requirements and re-rectification, it will bring a lot of trouble. After the basic engineering of the smt patch processing production line is completed, if it is a dedicated site for long-term products, anti-static equipment should be configured according to the anti-static requirements of long-term products.
It is forbidden to directly use wooden floors or lay wool, hemp, chemical fiber floors and ordinary floor leather in the anti-static area in the production line of the anti-static work area. The ground composed of electrostatic conductor materials should be selected, such as anti-static raised floors or fortification on ordinary ground. Static floor mats and effectively grounded.
Market
Shipping and Delivery
Three ways for the transportation: Air flight, Land transportation, Shipping.
